A cable cleat is designed to ensure that cables are fixed, retained and supported correctly so that in the event of short circuit fault or any other emergency, they will contain the cables without causing damage; enabling the circuit to be restored once the fault has been dealt with.
● Supporting cables and conductors & preventing excessive cable movement, making reworking easier and safer.
● Providing restraint and protecting against the effects of electro-dynamic forces, developing during a short circuit or earth fault.
● Reducing the mechanical load the cable may be exposed to under its own weight and the load the cable termination may be exposed to.
● Facilitating a neat and orderly installation, allowing cables to be used at their optimum ratings, whilst maximising the use of the available space.
● Attaching the cables to a mounting surface (ladder, tray, strut, or rail, wire and beam), without relying though on the mounting surface for the retention of the cables.
| Model | Outside Dia. φmm | L1 | L2 | L3 | L4 | M |
| JGH-01 | 55-65 | 127 | 158 | 70 | 160 | 2-M10 |
| JGH-0 | 65-80 | 127 | 160 | 71 | 160 | 2-M10 |
| JGH-1 | 80-100 | 145 | 175.5 | 75 | 190 | 2-M12 |
| JGH-2 | 100-120 | 187 | 217 | 77 | 190 | 2-M12 |
| JGH-3 | 120-136 | 192 | 225 | 77 | 230 | 2-M12 |
| JGH-4 | 136-160 | 210 | 248 | 88 | 230 | 2-M12 |
| JGH-5 | 136-160 | 210 | 248 | 88 | 230 | 2-M12 |
| Model | Outside Dia φmm | L1 | L2 | L3 | L4 | M |
| JGHD-1 | 55-65 | 125 | 155 | 75 | 100 | 2-M10 |
| JGHD-2 | 65-80 | 140 | 170 | 75 | 120 | 2-M10 |
| JGHD-3 | 80-100 | 162 | 192 | 80 | 140 | 2-M12 |
| JGHD-4 | 100-125 | 185 | 215 | 80 | 165 | 2-M12 |
| JGHD-5 | 126-136 | 210 | 240 | 100 | 180 | 2-M12 |
| JGHD-6 | 136-150 | 215 | 250 | 100 | 200 | 2-M12 |
| JGHD-7 | 140-160 | 230 | 280 | 100 | 215 | 2-M12 |
| Model | Outside Dia. pmm | L1 | L2 | L3 | L4 | M |
| JGP-1 | 44-55 | 150 | 180 | 65 | 135 | 2-M12 |
| JGP-2 | 55-68 | 186 | 170 | 75 | 156 | 2-M12 |
| JGP-3 | 68-80 | 224 | 192 | 80 | 186 | 2-M14 |
| JGP-4 | 80-90 | 245 | 215 | 80 | 205 | 2-M14 |
| JGP-5 | 90-100 | 280 | 240 | 100 | 235 | 2-M16 |
| JGP-6 | 100-114 | 290 | 250 | 100 | 252 | 2-M16 |
| JGP-7 | 114-130 | 300 | 280 | 100 | 265 | 2-M16 |
| Model | Outside dia. φmm | L1 | L2 | L3 | L4 | M |
| JGW(2)-1 | 40-50 | 140 | 174 | 60 | 60 | 2-M12 |
| JGW(2)-2 | 50-60 | 160 | 194 | 60 | 70 | 2-M12 |
| JGW(2)-3 | 60-70 | 185 | 219 | 70 | 82 | 2-M12 |
| JGW(2)-4 | 70-80 | 205 | 239 | 70 | 92 | 2-M12 |
| JGW(2)-5 | 80-90 | 225 | 259 | 80 | 102 | 2-M12 |
| JGW(2)-6 | 90-100 | 245 | 279 | 80 | 112 | 2-M12 |
| JGW(2)-7 | 100-110 | 270 | 304 | 90 | 122 | 2-M16 |
| JGW(2)-8 | 110-120 | 290 | 324 | 90 | 132 | 2-M16 |
| JGW(2)-9 | 120-130 | 310 | 344 | 90 | 142 | 2-M16 |
| JGW(2)-10 | 130-140 | 330 | 364 | 100 | 152 | 2-M16 |
| JGW(2)-11 | 140-1580 | 350 | 384 | 100 | 162 | 2-M16 |
| Model | Outside Dia pmm | L1 | L2 | L3 | L4 | M |
| JGWD-1 | 55-65 | 125 | 155 | 75 | 100 | 2-M10 |
| JGWD-2 | 65-80 | 140 | 170 | 75 | 120 | 2-M10 |
| JGWD-3 | 80-100 | 162 | 192 | 80 | 140 | 2-M12 |
| JGWD-4 | 100-125 | 185 | 215 | 80 | 165 | 2-M12 |
| JGWD-5 | 126-136 | 210 | 240 | 100 | 180 | 2-M12 |
| JGWD-6 | 136-150 | 215 | 250 | 100 | 200 | 2-M12 |
| JGWD-7 | 140-166 | 230 | 280 | 100 | 215 | 2-M12 |
| Model | Outside Dia φmm | L1 | L2 | L3 | L4 | M |
| JGW(3)-1 | 40-50 | 205 | 239 | 60 | 60 | 2-M12 |
| JGW(3)-2 | 50-60 | 245 | 269 | 60 | 70 | 2-M12 |
| JGW(3)-3 | 60-70 | 270 | 304 | 70 | 82 | 2-M12 |
| JGW(3)-4 | 70-80 | 300 | 334 | 70 | 92 | 2-M12 |
tel
+86-13738313195