How to select JXL series wedge-type parallel groove wire clamps and amp wire clamps?

The selection process of JXL series wedge-type parallel groove wire clamps and amp wire clamps is mainly based on two key factors: 1. Wire type 2. Wire specifications; the following are detailed selection steps and precautions:

1. Confirm the wire type

First, it is necessary to clarify the type of wire used. JXL amp wire clamps are suitable for many types of wires, including but not limited to overhead insulated wires (such as JKLYJ), steel core aluminum stranded wires (such as LGJ), aluminum stranded wires (LJ) and copper stranded wires (TJ). Confirming the wire type helps narrow the selection range and ensure that the selected wire clamp matches the wire material.

2. Confirm the wire specifications

Secondly, it is necessary to accurately know the specifications of the wire, that is, the cross-sectional area of the wire. The wire clamps the wire on both sides, so it is necessary to know the specific specifications of the wires on both sides (that is, it is necessary to confirm the specifications of the main line and the branch line at the same time). Common wire cross-sectional areas are 16mm², 25mm², 300mm², etc. Wires with different cross-sectional areas need to select wire clamps of corresponding specifications to ensure that the wire clamps can firmly clamp the wires and provide good electrical connections.

3. Select according to the selection table

After confirming the wire type and specification, you can refer to the selection table of the Amp wire clamp for JXL series wedge-shaped parallel groove wire clamps and Amp wire clamps (JXD wedge-shaped parallel groove wire clamps) to select. The selection table is usually divided according to the wire type and specification. By finding the position of the horizontal and vertical intersection, you can find the corresponding wire clamp model. For example, if the wires on both sides are JKLYJ-150, then you can find the corresponding JXL-XXX model in the selection table (the specific model needs to refer to the actual selection table).

If you need to know the detailed selection of other types of JXL series wedge-shaped parallel groove wire clamps and AMP wire clamps (JXD wedge-shaped parallel groove wire clamps), you can enter the MAXUN official website or consult MAXUN customer service staff;

IV. Precautions

Be cautious when selecting: Make sure that the selected wire clamp fully matches the wire type and specification to avoid installation difficulties or poor electrical connections due to improper selection.

Consider the installation environment: When selecting a wire clamp, you also need to consider the impact of the installation environment on the performance of the wire clamp, such as temperature, humidity, wind force and other factors.

Follow the installation specifications: When installing the wire clamp, you should strictly follow the product manual and installation specifications to ensure installation quality and safety.

V. Selection example

Suppose you need to select a JXL amp wire clamp for a JKLYJ-150 insulated aluminum stranded wire in an overhead distribution line. You can follow the following steps:

Confirm the wire type: JKLYJ insulated aluminum stranded wire.

Confirm the wire specifications: 150mm² for the main line and 150mm² for the branch line.

Find the selection table: In the selection table of JXL amp wire clamps, find the wire clamp model corresponding to the main and branch line cross-sectional area of 150mm² under the JKLYJ type, such as JXL-207 (the specific model needs to refer to the actual selection table).

Confirm the model and purchase: After confirming that the selected model is correct, you can purchase the corresponding JXL amp wire clamp for installation.

In short, the selection process of JXL amp wire clamps needs to comprehensively consider the two factors of wire type and specification, and refer to the selection table for accurate selection. At the same time, the product manual and installation specifications should be strictly followed during the installation process to ensure installation quality and safety.